**Authors:**
Abdulrahman Abdulrahman

**Abstract:**

When the Manning equation is used, a unique value of normal depth in the uniform flow exists for a given channel geometry, discharge, roughness, and slope. Depending on the value of normal depth relative to the critical depth, the flow type (supercritical or subcritical) for a given characteristic of channel conditions is determined whether or not flow is uniform. There is no general solution of Manning's equation for determining the flow depth for a given flow rate, because the area of cross section and the hydraulic radius produce a complicated function of depth. The familiar solution of normal depth for a rectangular channel involves 1) a trial-and-error solution; 2) constructing a non-dimensional graph; 3) preparing tables involving non-dimensional parameters. Author in this paper has derived semi-analytical solution to Manning's equation for determining the flow depth given the flow rate in rectangular open channel. The solution was derived by expressing Manning's equation in non-dimensional form, then expanding this form using Maclaurin's series. In order to simplify the solution, terms containing power up to 4 have been considered. The resulted equation is a quartic equation with a standard form, where its solution was obtained by resolving this into two quadratic factors. The proposed solution for Manning's equation is valid over a large range of parameters, and its maximum error is within -1.586%.

**Keywords:**
Channel design,
civil engineering,
hydraulic engineering,
open channel flow,
Manning's equation,
normal depth,
uniform flow.

**Digital Object Identifier (DOI):**
doi.org/10.5281/zenodo.1340204

Procedia
APA
BibTeX
Chicago
EndNote
Harvard
JSON
MLA
RIS
XML
ISO 690
PDF
Downloads 1682
**References:**

[1] Bakhmeteff, B. A. (1932). Hydraulics of open channels. McGraw-Hill Book Co. Inc., New York, N.Y.

[2] Chow, V. T. (1958). Open Channel Hydraulics, McGraw-Hill Book Co. Inc., New York, N. Y.

[3] French, R. H. (1987). Open Channel Hydraulics, McGraw-Hill Book Co. Inc., New York, N. Y.

[4] Heading, J. (1970). Mathematical Methods in Science and Engineering, p. 40, 2nd Ed., Edward Arnold, London.

[5] Hendeson, F.M. (1966). Open Channel Hydraulics, Macmillan Company, New York, N. Y.

[6] Sturm, Terry W. (2001). Open Channel Hydraulics, P. 33, 1st Ed., McGraw-Hill Company, Inc., 1221 Avenue of the Americas, New York, N. Y. 10020.