Are spax the best screws?

Are spax the best screws?

Are spax the best screws?

Yes, they're cheap. Yes, we always seem to have a box or two of them handy. But they're not multipurpose screws; they're good for one thing, and that's hanging drywall. ... Instead, we suggest picking up some Spax or GRK construction screws.

What are spax screws used for?

SPAX® multi-purpose construction screws are the versatile fastening solution for multiple materials including wood, concrete, masonry, sheet metal, plastic, and treated lumber. Use our high-performance, professional-grade screws for a wide range of interior and exterior applications.

Where are spax screws made?

the USA Engineered to Be Better Often imitated, but never duplicated, SPAX® Construction Screws and PowerLags® are proudly manufactured, tested, and packaged in the USA!

Are spax screws structural?

German engineered and American made, SPAX® PowerLags® are professional grade structural screws and sold in job-friendly package quantities, including bulk pails.

Why are screws so expensive?

Ever wonder why fasteners like nuts and bolts are so expensive? You would think something so standard and manufactured in such high volumes would be cheap, but in most places, they're actually pretty expensive. ... They are manufactured in automated factories where they are pumped out by the ton.

Do spax screws need pilot holes?

First, drill a pilot hole through both boards. Pilot holes guarantee that your screw won't break off and your wood won't crack. For most hardwoods, the pilot hole should be at least as large as the screw's minor diameter. If the screw has deep threads, or the wood is very hard, the pilot hole should be another 1/64-in.

Who makes spax?

BRINCK & CO. U.S., INC. Since 2006, SPAX® fasteners marketed in North America are manufactured in the ALTENLOH, BRINCK & CO. U.S., INC. complex in Bryan, Ohio, which is ISO 9001:2015 Certified.

How much weight can structural screws hold?

A screw in a stud can hold between 80 and 100 pounds. Be sure to distribute the weight across as many as you can.

Are screws expensive?

Tool and die makers know that screws are expensive, even adding up to $20,000. The screws used for connecting two blocks of steel alone for example cost up to $250 each. '

What makes Spax construction screws and fasteners so good?

SPAX is the common denominator that plays well with virtually every material and project type. From our patented 4CUT™ Point to our exclusive T-STAR plus drive, every inch of our construction screws and fasteners is German-engineered to work harder for you.

Why do you use ground serrations on Spax?

Pre-drilling creates space for the screw in the material and thus prevents the workpiece from splitting. Pre-drilling is a time-consuming work step that can be effectively dispensed with by using SPAX with ground serrations and SPAX 4CUT point (depending on the wood).

Do you need to pre drill for Spax 4cut?

This tedious pre-drilling is then no longer necessary (depending on the wood) as the special SPAX 4CUT point cleanly pushes aside the fibres of the wood, preventing splintering and splitting of the wood even when the screws are positioned close to the edge. It should be noted that pre-drilling is always recommended for very hard woods.

Which is better for corrosion wirox or Spax?

The coating that offers extremely good corrosion protection. The new and exclusive WIROX coating from SPAX offers better corrosion protection in the neutral salt-spray fog test than is required by standard for conventional bright zinc coating and it has a considerably higher surface hardness.

Related Posts: