What terminates a dimension line?
Table of Contents
- What terminates a dimension line?
- Which leader line termination is used for a face?
- Is the terminating point of dimension line?
- Which is terminated by arrowheads dimension lines or extension lines?
- What is the symbol of leader line?
- What is the purpose of leader line?
- What is the difference between aligned and unidirectional dimensioning?
- What is the Terminator for a leader line?
- What do you use with a leader line?
- Is the leader line a continuous thin line?
- What do leader lines mean in technical drawing?
What terminates a dimension line?
Each dimension should be terminated by arrowheads touching the extension lines and pointing in opposite directions. Arrowheads are drawn freehand with . 7mm/HB lead. The line should be broken only at the approximate center for the dimension figures.
Which leader line termination is used for a face?
An arrow terminator is used to point to an edge of an item. The dot is used to point to a face. The Architectural tick can be used for referring to multiple parallel edges.
Is the terminating point of dimension line?
radius of an arc is to be indicated, there is an arrow at only the end of the line that touches the arc. The other end, without an arrow, terminates at the point used as the center in drawing the arc. The arrowhead on a dimension or leader line is an important detail of a drawing.
Which is terminated by arrowheads dimension lines or extension lines?
Drafting I - Dimensioning
| A | B |
|---|---|
| Dimension lines | Terminated by arrowheads |
| Dimension lines | Shows the beginning and the end of the measurement |
| Dimension lines | Thin line weight |
| Dimension lines | Should be broken to allow for the numbers to be inserted |
What is the symbol of leader line?
Leader lines are solid lines with one arrowhead. They indicate a part or portion that a note, number, or other reference applies.
What is the purpose of leader line?
The leader lines purpose is to present a lure or bait naturally. The best way a leader line can do this is being invisible underwater. If the fish sees the leader line or mainline it may get spooked, or the lure will not look as natural and the fish will be less inclined to bite it.
What is the difference between aligned and unidirectional dimensioning?
What is the difference between aligned and unidirectional system? In the aligned system, the dimension is placed perpendicular to the dimension line. In the unidirectional system, all dimensions are placed such that they can be read from the bottom of the drawing sheet.
What is the Terminator for a leader line?
A leader line also has a terminator and some text. A leader line may have a reference line under the text. The British technical drawing standards give us four different types of terminators to use with our leader lines. An arrow terminator is used to point to an edge of an item.
What do you use with a leader line?
A leader line may have a reference line under the text. The British technical drawing standards give us four different types of terminators to use with our leader lines. An arrow terminator is used to point to an edge of an item. The dot is used to point to a face. The Architectural tick can be used for referring to multiple parallel edges.
Is the leader line a continuous thin line?
The leader line itself should be a continuous Thin line (see this post on Linetype Definitions). A leader line also has a terminator and some text. A leader line may have a reference line under the text.
What do leader lines mean in technical drawing?
Technical Drawing Standards: Leader Lines. Technical Drawing Standards: Leader Lines. A leader line is a line that establishes a connection between a graphical representation of an item and some text. A leader points to a bit of our drawing and says:
