Do you have to bypass ballast for LED lights?

Do you have to bypass ballast for LED lights?

Do you have to bypass ballast for LED lights?

Since LED lights work on low DC voltage, they need a driver. Most T8 LED tubes do not need a ballast. So, if you are going to install a T8 LED tube light, it will require a ballast bypass unless you choose a ballast compatible T8 LED tube.

What happens if you bypass a ballast?

The most significant negative to a ballast-bypass linear LED is the risk of electric shock since the sockets carry line voltage. It's a common practice to place a finger on the lamp pins while you are trying to install it, and this becomes a risky endeavor when using single-ended ballast-bypass lamps .

Can all LED tubes work without a ballast?

The short answer is you need to rewire your fixture. Hybrid LED tubes will work with or without a ballast. ... However, it's important to note that when rewiring your fixture for direct wire operation, you should switch out any shunted sockets for non-shunted sockets.

Can I replace fluorescent tube with LED?

Yes, you can replace fluorescent tubes with LED tubes or LED integrated fixtures. ... As long as the bulb is compatible with the existing fluorescent ballast in the fixture, you simply remove the fluorescent and replace it with the LED tube light.

How do you bypass a ballast to install LED tubes?

1:242:37How to Bypass a Ballast to Install LED Tubes in a Fluorescen - YouTubeYouTube

How do I know if my ballast is T8 or T12?

You will see either T8 or T12 stamped on one side near the end with the prongs. You also will see the lamp's rated wattage, usually 32 watts for T8 and 40 watts for T12. Measure the diameter of the lamp. T12 lamps are larger than T8 lamps, with a 1 ½-inch diameter.

What is the equivalent of 15 watts LED?

LED light bulbs take energy efficiency to another level, using around 40% less energy than CFL equivalents....LED equivalents to CFL light bulbs.
CFL Light Bulb WattageLED Equivalent Wattage
20 Watt12 Watt
15 Watt9 Watt
9 Watt5.

How to bypass ballast for LED tube light installation?

However, some LED tube lights require the ballast to be removed. When shopping for an LED tube light that can work with the ballast still in place, look for "Ballast Compatible" LED tube lights. "Ballast bypass" tube lights require the ballast to be removed.

Do you need a ballast for a T8 LED light?

Most T8 LED tubes do not need a ballast. So, if you are going to install a T8 LED tube light, it will require a ballast bypass unless you choose a ballast compatible T8 LED tube. Type A: These are also known as ‘Plug and Play’ tube lights. They are compatible with linear fluorescent tube ballasts.

What kind of LEDs work without a ballast?

Type B: These tubes are also known as ‘Ballast Bypass’ or ‘Direct wire’ T8 LED tubes. Installing them means you will have to remove an existing fluorescent tube ballast. Type A+B: Also known as ‘Hybrid’ T8 LED tubes, Type A+B tubes work with or without a ballast. To Shunt Or Not To Shunt!

Which is cheaper ballast compatible or ballast bypass?

Ballast bypass type LED tube lights are generally slightly cheaper than Ballast Compatible. Whether going with Ballast Compatible or Ballast Bypass, it's a good idea to remove the ballast from the light fixture in order to save an extra 10% of energy per fixture.

Related Posts: