How do you clamp a bike with a dropper post?

How do you clamp a bike with a dropper post?

How do you clamp a bike with a dropper post?

2:244:04Clamping your dropper post is no big deal - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook when you clamp your bike just leave the stand loose. The bike will fall into its naturalMoreLook when you clamp your bike just leave the stand loose. The bike will fall into its natural position putting no appreciable lateral force on the internals. Sure the bike is pulling on the post.

Should you clamp your dropper post?

A big question we are often asked is whether it's ok to clamp your bike in a work stand using the dropper shaft. ... It is also vital that you only clamp an extended seat post. If not, the weight of the bike in the stand will extend the post and pull air past the internal seals inside the post.

Can you lock a dropper post?

You can lock it up at home if you don't have room for it take it to the store ect..... It will be fun to ride a new to you bike.

Can you change seat post clamp?

On some older bikes, the seatpost clamp is not a separate ring of material; it's integrated as part of the bike frame, with just an opening for the bolt or quick-release skewer to pass through. In these cases, it's not possible to replace the clamp itself, but you can still replace the bolt or quick-release lever.

Can you clamp a carbon frame?

The mechanical clamping action of repair stands concentrates powerful loads in a small area so you should always clamp your carbon bicycle safely. Never clamp the frame. Instead, if you have a round aluminum seatpost, clamp that.

Can you clamp a carbon bike?

Clamp it anywhere you like, as long as you don't over-tighten.. The seat post, not the tube. Tubes aren't meant to be clamped, posts are. Clamped the top tube on all my carbon bikes.

How do you clamp a bike in stand?

0:000:494. Clamping Bike Into Stand - YouTubeYouTube

How do I measure seatpost clamp?

Seat post clamp size refers to the inside diameter size of the clamp. This should correspond to the outside diameter of bike frame where the clamp is used. Just measure the outside diameter of the frame where the clamp will be used.

Do you need to clamp a dropper seat post?

@aps62: Frame paint isn't nearly as durable as the finish on any mountain bike seat post. Also, a lot of full-suspension frames don't have a good spot to clamp. Regardless, in a worst case scenario, a seat post, even a dropper, is less expensive to replace/fix than a frame.

How much of a dropper post do I Need?

This is how much of the dropper post you need to install within the seat tube, for safety purposes. You’ll focus on finding a dropper post that will fit your specific seat height when fully extended, while taking into account the minimum insertion requirement of the dropper post, plus the maximum insertion depth for your seat tube.

What does a dropper post do on a bicycle?

So what is a dropper post and what do they do? A dropper post, commonly referred to as a dropper, is a replacement for your bicycle’s seat post and allows for quick adjustment of saddle height without requiring you to get off your bike or even stop moving.

Why do you need a dropper post on a hill?

As you go into the hill you have the option of raising your seat to gain increased leverage. In short, a dropper post enables a way-above-average experience—literally. Prior to dropper posts you fixed your seat height in position, unless you stopped to adjust seat post height of course.


Related Posts: