Where must a fire alarm pull station be located?

Where must a fire alarm pull station be located?

Where must a fire alarm pull station be located?

Location – Manual fire alarm boxes (pull stations) shall be located not more than five feet from the entrance to each exit. Manual fire alarm boxes shall be located in each story including basements.

Where are manual pull stations required?

NFPA 72 requires that manual pull stations be installed within 60 inches of the exit doorway of each exit, mounted between 42 inches and 48 inches to the center of the handle, and, among other things, be red in color. Below we have an picture of a typical manual pull station.

How many pull stations are required?

The National Fire Protection Association (NFPA) 101 Life Safety Code requires at least one manual fire pull station in each building. The code states that a building should not entrust life safety to only one safeguard, and directs that additional safeguards be implemented.

What happens when a fire alarm pull station is activated?

D. 1.

Can a fire alarm be blocked?

This probably occurs as often if not more so than fire extinguisher obstruction. The most common fire alarm pull station obstruction items are plants, furniture, and displays. If someone can't clearly spot the fire alarm pull station then there's a problem and you need to remove the obstruction.

What are the two types of fire alarm systems?

The two main types of smoke detectors on the market include ionization detectors and photoelectric detectors. Inside the first type, there's an ionization chamber with two plates and a source of ionizing radiation.

What is the maximum distance between fire pull stations?

50 feet The maximum distance between manual pull stations is 50 feet.

What is the maximum distance between pull stations?

NFPA 72 refers to fire alarm pull stations as “manual fire alarm boxes.” The code requires that the travel distance to the nearest pull station on a given floor must be no more than 200 feet. So, the larger the building and the longer its hallways, the more pull stations will be required.

How do you activate fire alarm?

To activate a Fire Alarm, pull the handle on one of the red fire alarm boxes. In all cases of fire, call 911 immediately. Someone must report the fire. Do not assume someone else is making this call, make the call yourself!!

When should I pull my fire alarm?

EH&S instructs laboratories with hazardous materials to pull the fire alarm to evacuate the building when a chemical or hazardous material spill has occurred that poses a danger to others in the surrounding area.

What is the NFPA code for a pull station fire alarm?

Alarms should initiate by manual fire alarm boxes – commonly called pull stations (14.

How does a manual pull work on a fire alarm?

Once a manual pull has been activated, it must be restored to its ready position. This typically requires a special tool or key, which is used to open the alarm station. Opening the alarm station allows the handle to revert to its original ready position.

What are the requirements for a fire alarm system?

Initiation of the required fire alarm system shall be by manual means in accordance with 9.

Where are fire alarm pull stations located in Ontario?

(7) In floor areas where the manual pull stations are located in dwelling units, a legible sign stating FIRE ALARM PULL STATIONS LOCATED IN APARTMENT UNITS shall be posted near every exit in a public corridor.


Related Posts: